The Secret World of Alternative Operating Systems

Step into the world of operating system alternatives to Windows, Mac OS X, or Linux.

Credits:Benj Edwards

Would you recommend this? YES85 NO20

The Background

When it comes to desktop operating systems, there are three obvious choices: Windows, Mac OS X, and Linux. But a whole world of alternative OSes lies below the mainstream radar.
These little-known products are actively or recently developed, and some folks actually use them to get things done. Here are twelve of these strange beasts, all of which run on modern x86-based PC hardware, and many of which can be downloaded for free. Impressively, none of them are based on Linux.




Sabily

Sabily (Arabic literary meaning: My Way) is a free, open source operating system designed by and for Muslims. It is based on the popular Ubuntu Linux distribution which is a Free and Open Source (FOSS) operating system and has pre-installed packages for the Arabic language. Sabily includes a set of packages that customizes Ubuntu. Ubuntu is easy to use for a novice user, with the most-used Office, Internet, Graphics and Video applications already installed.

With Sabily, Muslim users have “out of the box” Islamic software and tools installed as well. Sabily includes Islamic software (prayer times tool, Qur'an study tool, Hijri calendar etc.) and has a custom design. Sabily can be downloaded for free from the official website.





OpenGEM

GEM (Graphical Environment Manager) began its life in 1985 as Digital Research's graphical

shell for CP/M. It made its way to MS-DOS and was the Atari ST's interface. Caldera, which ended up owning GEM, open-sourced it in 1999. Since then, enthusiasts have updated and extended the code, which is typically released as FreeGEM or OpenGEM.

You can download an OpenGEM package that runs on just about any PC and includes apps-I recommend the "Full CD" package of FreeDOS, a DOS workalike that comes with OpenGEM. Just don't expect too much: GEM retains its primitive look-and-feel so it can run on old hardware.

Syllable

Syllable is a free, open source OS with a strange pedigree. It began in 2002 as a fork of AtheOS, an earlier open source operating system (no longer developed) that once aspired to be an AmigaOS clone. Syllable uses the AtheOS file system (itself similar to the BeOS file system) and retains partial POSIX compliance that makes it easier for Syllable enthusiasts to port Linux applications over to the platform if desired.

The ultimate result is an operating system that is neither here nor there and has very little application support. But its developers keep chugging along with the goal to provide a free, easy-to-use desktop OS that is not based on Linux.

MenuetOS

As a capable graphical OS, MenuetOS pulls off a remarkable feat: it can be booted and run off a single 3.5″ floppy disk. Of course, if you want a more sophisticated setup, you can install it on a hard drive.

A key feature of MenuetOS that lets it run in such limited space is that it is written entirely in x86 assembly language. The author's dedication to assembly-only programming keeps the OS and its included apps lean and speedy, and these properties have attracted a small but dedicated following over the past decade.

Breadbox Ensamble

Breadbox Ensemble traces its ancestry to PC/GEOS (cousin of the more well-known 8-bit GEOS), released by Berkeley Softworks in 1990. Like GEM, the environment failed to catch on in the face of Windows' success, so ownership of the OS changed hands over the years while maintaining a user base.

Ensemble, in its current configuration, looks and feels much like a cousin of Windows 95, and its capabilities are roughly equivalent. Unlike most of the operating systems on this list, it's not free software. Breadbox Computer Company still sells it from their website for $99.95 a copy.

Inferno

Inferno began in 1995 as a research operating system at Bell Labs. Its designers wanted to incorporate lessons learned in an earlier Bell research OS playfully called "Plan 9 From Bell Labs." Both are notable for being distributed OSes, which seamlessly allow users to utilize computing resources distributed across a network of machines.

Inferno differs significantly from Plan 9, however, by its inclusion of a virtual machine that ensures applications and the user interface are consistent across all platforms (which include x86, ARM, PowerPC, and SPARC). Inferno can be downloaded for free from its official website.

eComStation

After 1996′s OS/2 Warp 4, IBM's OS/2-the OS that was supposed to replace DOS-fell off the radar for most PC users. Behind the scenes, however, loyal users began to clamor for updates and upgrades. Within a few years, a company called Serenity Systems-with permission from IBM-began to deliver them. Serenity wrapped its OS/2 upgrades and OS/2 itself into a new OS distribution called eComStation, which Serenity still actively develops today. eComStation, currently at version 2.0, sells for $149 (Home Edition) to $219 (Business Edition).

Seal GUI for DOS

While Microsoft abandoned plain old MS-DOS back in 1995, that hasn't stopped die-hard users of the classic command line OS from keeping its spirit alive. A number of Windows-like graphical shells are available for MS-DOS and its workalike cousins (notably FreeDOS and DR-DOS) - we've already seen one in the form of OpenGEM.

Another well-regarded and capable GUI for DOS is Seal, a colorful 32-bit windowing system with low system requirements (it runs on a 486 CPU and up). It's also free, open source, and tweakable.

KolibriOS

KolibriOS is a small and speedy assembly-based hobby operating system that forked off of MenuetOS code in 2004. Like MenuetOS, this free, open-source OS can be run off a single floppy disk, but is also capable of expanding to meet larger needs on a hard disk installation. While Kolibri and Menuet are similar under the hood, each subscribes to a different user interface philosophy. Each is equally capable in its own way.

SkyOS

It's rare that someone undertakes a project to write a completely new x86-based operating system from scratch and sell it as closed source, proprietary software. But that's exactly what happened with SkyOS, which began as a simple bootloader program by Robert Szeleney in 1996. Over the next 8 years, Szeleney transformed it into a full-blown graphical OS with its own file system and API. He aimed to sell it and launched a paid beta program in 2004. Around 2008, updates began to dry up due to changes in Szeleney's life. Currently, development for SkyOS is on hold as Szeleney ponders the fate of what he has created.

ReactOS

If you've ever wanted to run Windows without actually running Windows, you're in luck. ReactOS is a free, open source Windows NT clone that aims to be 100% binary compatible with software written for Microsoft's NT-based operating systems (a la Windows XP).

This Windows clone is still in an early Alpha state, but it looks very promising. You can download a copy to try yourself from its official website.

Visiopsys

Visiopsys is a GUI-based hobby operating developed from scratch by programmer Andy McLaughlin in his spare time. The result, while limited compared to a commercial operating system, feels impressive for a one-man operation. It's open source and available for free download on the Visiopsys website.

Haiku

Of all defunct OSes, BeOS may have had the most promise. It emphasized simplicity, elegance, and support for parallel processing. The cancellation of development in 2001 upset BeOS fans.

Enter Haiku, a free, open-source BeOS. Over the past 10 years, Haiku developers have made impressive strides, despite the fact that the OS is still in an early alpha state. Due to Haiku's BeOS compatibility, many quality applications are available for this actively-developed OS. If Haiku continues to improve, the OS could become a mainstream, alternative desktop OS on par with Ubuntu Linux.

Linux Mint

Linux Mint is an Ubuntu-based distribution whose goal is to provide a more complete out-of-the-box experience by including browser plugins, media codecs, support for DVD playback, Java and other components. It also adds a custom desktop and menus, several unique configuration tools, and a web-based package installation interface. Linux Mint is compatible with Ubuntu software repositories. Download Linux Mint for free from the official website.




References:

1. http://www.sabily.org/website
2. http://www.pcworld.com/article/228048 /the_secret_world_of_alternative_operating_systems.html
3. http://www.distrowatch.com
4. Benj Edwards, Technologizer

Openmeetings

How to install Openmeetings 1.9.1 on Ubuntu Server 10.04 LTS


First we need to add the partner repositories, editing the sources.list file and removing the comments for the partner lines

sudo nano /etc/apt/sources.list

sudo add-apt-repository “deb http://archive.canonical.com/ lucid partner”

sudo apt-get update

Then install the necessary packages

sudo apt-get install -y java-package sun-java6-bin sun-java6-jdk sun-java6-jre mysql-server openoffice.org-writer openoffice.org-calc

sudo apt-get install -y openoffice.org-impress openoffice.org-draw openoffice.org-math imagemagick gs-gpl libart-2.0-2 libt1-5 zip unzip bzip2 subversion git-core checkinstall

sudo apt-get install -y yasm texi2html libfaac-dev libfaad-dev libmp3lame-dev libsdl1.2-dev libx11-dev libxfixes-dev libxvidcore-dev zlib1g-dev libogg-dev sox libvorbis0a libvorbis-dev libgsm1 libgsm1-dev libfaad2 flvtool2 lame swftools

sudo apt-get install -y ghostScript imageMagick libpaper-utils msttcorefonts openoffice.org-base openoffice.org-calc openoffice.org-draw openoffice.org-filter-binfilter openoffice.org-filter-mobiledev openoffice.org-headless openoffice.org-impress openoffice.org-math openoffice.org-writer pstoedit ttf-dejavu netbeans

Now, for the ffmpeg, it is necessary to download, compile and install it:

wget http://www.ffmpeg.org/releases/ffmpeg-0.6.1.tar.gz

tar -zxvf ffmpeg-0.6.1.tar.gz

cd ffmpeg-0.6.1/

./configure --enable-libmp3lame --enable-libxvid --enable-libvorbis --enable-libgsm --enable-libfaad --enable-libfaac --enable-gpl --enable-nonfree
make

sudo checkinstall

Now that all the dependencies for Openmeetings are met, let’s start the Openmeetings installation.

Get openmeetings (this includes the Red5 server):

wget http://openmeetings.googlecode.com/files/openmeetings_1_9_1_r4707.zip



Extract it and move it to /opt

unzip openmeetings_1_9_1_r4707.zip

sudo mv red5 /opt/

Change owner to nobody

sudo chown -R nobody\: /opt/red5

Make all the scrips executable

sudo chmod +x /opt/red5/*.sh

sudo chmod +x /opt/red5/webapps/openmeetings/jod/*.sh

Now let’s create the startup script for openmeetings:

sudo nano /etc/init.d/red5

Paste the following code:

#! /bin/sh
#
# red5 red5 initscript
#
# Author: Simon Eisenmann .
#
set -e
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DESC="Red5 flash streaming server"
NAME=red5
RED5_HOME=/opt/red5
DAEMON=$RED5_HOME/$NAME.sh
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME
# Gracefully exit if the package has been removed.
test -x $DAEMON || exit 0
# Read config file if it is present.
if [ -r /etc/default/$NAME ]
then
. /etc/default/$NAME
fi
#
# Function that starts the daemon/service.
#
d_start() {
start-stop-daemon --start -c nobody --pidfile $PIDFILE --chdir $RED5_HOME --background --make-pidfile --exec $DAEMON
}
#
# Function that stops the daemon/service.
#
d_stop() {
start-stop-daemon --stop --quiet --pidfile $PIDFILE --name java
rm -f $PIDFILE
}
case "$1" in
start)
echo -n "Starting $DESC: $NAME"
d_start
echo "."
;;
stop)
echo -n "Stopping $DESC: $NAME"
d_stop
echo "."
;;

restart|force-reload)
echo -n "Restarting $DESC: $NAME"
d_stop
sleep 1
d_start
echo "."
;;

*)
echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
exit 1
;;

esac
exit 0
exit 0

Now the same thing for openoffice startup script:

sudo nano /etc/init.d/openoffice

Paste the following code:

#!/bin/bash


# openoffice.org headless server script


#

# chkconfig: 2345 80 30


# description: headless openoffice server script

# processname: openoffice

#

# Author: Vic Vijayakumar

# Modified by Federico Ch. Tomasczik

#

OOo_HOME=/usr/bin

SOFFICE_PATH=$OOo_HOME/soffice

PIDFILE=/var/run/openoffice-server.pid

set -e

case "$1" in

start)

if [ -f $PIDFILE ]; then

echo "OpenOffice headless server has already started."

sleep 5

exit

fi

echo "Starting OpenOffice headless server"

$SOFFICE_PATH -headless -nologo -nofirststartwizard -accept="socket,host=127.0.0.1,port=8100;urp" & > /dev/null 2>&1

touch $PIDFILE

;;

stop)

if [ -f $PIDFILE ]; then

echo "Stopping OpenOffice headless server."

killall -9 soffice && killall -9 soffice.bin

rm -f $PIDFILE

exit

fi

echo "Openoffice headless server is not running."

exit

;;

*)

echo "Usage: $0 {start|stop}"

exit 1

esac

exit 0



Make both scripts executable:

sudo chmod +x /etc/init.d/red5

sudo chmod +x /etc/init.d/openoffice

Now let’s make both services start automatically:

sudo update-rc.d red5 defaults

sudo update-rc.d openoffice defaults

Almost done, now to create openmeetings database (we have created a database user named openmeetings with the password password):

echo "CREATE USER openmeetings@localhost;" | mysql -u root -p

echo "CREATE DATABASE openmeetings DEFAULT CHARACTER SET 'utf8';" | mysql -u root -p

echo "GRANT ALL PRIVILEGES ON openmeetings.* TO 'openmeetings'@'localhost' IDENTIFIED BY 'password' WITH GRANT OPTION;" | mysql -u root -p

echo "FLUSH PRIVILEGES;" | mysql -u root -p

And now configure openmeetings to use the database user created above:

sudo nano /opt/red5/webapps/openmeetings/conf/hibernate.cfg.xml

In the User / Password section, configure the correct database username (openmeetings) and password (password)




Now start openmeetings and openoffice:

sudo /etc/init.d/red5 start

sudo /etc/init.d/openoffice start

Go to a browser and point to the following link:

http://localhost:5080/openmeetings/install
or
http://[server ip]:5080/openmeetings/install

Press “Continue with step 1”

Then, fill the following fields:

Username

Userpass

Email

User time zone

Name

Default language

Then, finally click on the “Install” button, and Voila!


Credits

1. Nicky Hajal
2. http://www.757.org/~joat/wiki/index.php?n=Main.InstallationOfOpenMeetings
3. http://www.sherin.co.in/red5-flash-media-server-development-how-to-install- and-configure/
4. http://code.google.com/p/openmeetings/wiki/InstallationOfRelease051
5. http://code.google.com/u/110427356855791826607/

Ntop

Contents

1. Installation
1. Compiling ntop from source or SVN
2. Configuration
1. Fixing "Physical Host Location" feature (mapper.pl)
3. Access
4. Links



Ntop shows the current network usage. It displays a list of hosts that are currently using the network and reports information concerning the IP (Internet Protocol) and Fibre Channel (FC) traffic generated by each host. The traffic is sorted according to host and protocol. Protocols (user configurable) include:

* TCP/UDP/ICMP
* (R)ARP
* IPX
* DLC
* Decnet

AppleTalk
* Netbios
* TCP/UDP
FTP, HTTP, DNS, Telnet, SMTP/POP/IMAP, SNMP, NFS, X11
* Fibre Channel
o o Control Traffic - SW2, GS3, ELS o SCSI

(In human-readable, this means you can very comprehensively monitor your network traffic, connections & bandwidth via a web output)

Installation

UBUNTU

Packages needed for installation are:

ntop

You can just type the following to install it (make sure you enable the Universe repositories): https://help.ubuntu.com/7.10/add-applications/C/extra-repositories.html

sudo apt-get install ntop -y

Compiling ntop from source or SVN

The ntop source can be retrieved from Ubuntu's servers using a command like:

apt-get source ntop

which will unpack the source package into the current working directory with a name like ntop-3.3.10. You can also follow the instructions at ntop.org to retrieve the latest version from SVN (trunk):

svn co https://svn.ntop.org/svn/ntop/trunk/ntop

Most of the packages which will be required to build ntop from source on an Ubuntu 9.10 (Karmic) can be retrieved with the following command:

sudo apt-get install libpcap-dev libgdbm-dev libevent-dev librrd-dev python-dev libgeoip-dev

You must first run ./autogen.sh in the ntop directory to create the configure script, Makefiles, and such, as described here. The configure script is pretty good about telling you which dependencies are missing, if any. Don't forget you can pass configure options to autogen.sh, as in:

./autogen.sh --prefix=/usr/local/stow/ntop-svn


RPM - RedHat, CentOS, ClearOS, etc

Download latest ntop

Visit ntop project to grab latest version. You can use wget to grab the same, enter:
#cd /opt
#wget http://freshmeat.net/redir/ntop/7279/url_tgz/ntop-3.3.6.tar.gz

Untar tar ball, enter:
#tar -zxvf ntop-3.3.6.tar.gz
Configure and Compile ntop under RHEL

You must have RRDTool installed. You also need to install libpcap, enter:
# yum install libpcap-devel libpcap


Type the following commands to compile and install ntop:
#cd ntop
#./autogen.sh

Just type make to compile ntop:
#make

Just type make install to install ntop:
#make install
#make install-data-as




Configuration
UBUNTU
When first installing & configuring the ntop application you need to set an admin password.

sudo ntop --set-admin-password

restart the service with

sudo /etc/init.d/ntop restart

RPM - RedHat, CentOS, ClearOS, etc

Type the following command to run ntop as ntop user, enter:
#useradd -M -s /sbin/nologin -r ntop

Setup directory permissions

Next, you need to setup directory permissions, enter:
#chown ntop:root /usr/local/var/ntop/
#chown ntop:ntop /usr/local/share/ntop/

Setup ntop user admin password

Type the following command to set ntop admin password, enter:
#ntop -A

Sample output:

Mon Jul 28 03:38:34 2008  NOTE: Interface merge enabled by default
Mon Jul 28 03:38:34 2008  Initializing gdbm databases
ntop startup - waiting for user response!
Please enter the password for the admin user:
Please enter the password again:
Mon Jul 28 03:38:42 2008  Admin user password has been set

Start ntop

Type the following command to start ntop:
# /usr/local/bin/ntop -d -L -u ntop -P /usr/local/var/ntop --skip-version-check --use-syslog=daemon
Sample output:

Mon Jul 28 03:42:19 2008  NOTE: Interface merge enabled by default
Mon Jul 28 03:42:19 2008  Initializing gdbm databases

If you have multiple interface (eth0, eth1 and so on), start ntop as follows:
# /usr/local/bin/ntop -i "eth0,eth1" -d -L -u ntop -P /usr/local/var/ntop --skip-version-check --use-syslog=daemon





The host location results com from http://geotool.servehttp.com instead, a service of MaxMind, who provide the libgeoip1 library also used in ntop.

Access

To access your network statistics via the web visit the web address:

http://localhost:3000
OR
http://server-ip:3000


References:

1.
http://www.ntop.org/download.html
2.
http://www.gnu.org/software/stow/ - helps manage source packages without sullying /usr/bin, /usr/share, and so on
3.
http://didar15.wordpress.com/2011/12/21/install-ntop-on-redhat-linuxcentos
4.
http://csmartonline.com/blog/2011/12/21/installing-ntop-for-clearos/

Find Hidden Processes and Ports - Linux / Unix / Windows

Quick Tip: Find Hidden Processes and Ports [ Linux / Unix / Windows ]

by Vivek Gite on November 24, 2011 · 9 comments

Unhide is a little handy forensic tool to find hidden processes and TCP/UDP ports by rootkits / LKMs or by another hidden technique. This tools works under both Linux / Unix, and MS-Windows operating systems. From the man page:

It detects hidden processes using three techniques:

1. The proc technique consists of comparing /proc with the output of /bin/ps.
2. The sys technique consists of comparing information gathered from /bin/ps with information gathered from system calls.
3. The brute technique consists of bruteforcing the all process IDs. This technique is only available on Linux 2.6 kernels.

Most rootkits use the power of the kernel to hide themselves, they are only visible from within the kernel. You can use unhide or tool such as rkhunter to scan for rootkits, backdoors and possible local exploits.

How do I Install Unhide?

It is recommended that you run this tool from read-only media. To install the same under Debian or Ubuntu Linux, enter:
# apt-get install unhide
Sample outputs:

Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
rkhunter
The following NEW packages will be installed:
unhide
0 upgraded, 1 newly installed, 0 to remove and 6 not upgraded.
Need to get 822 kB of archives.
After this operation, 1,872 kB of additional disk space will be used.
Get:1 http://ftp.us.debian.org/debian/ squeeze/main unhide amd64 20100201-1 [822 kB]
Fetched 822 kB in 5s (162 kB/s)
Selecting previously deselected package unhide.
(Reading database ... 166644 files and directories currently installed.)
Unpacking unhide (from .../unhide_20100201-1_amd64.deb) ...
Processing triggers for man-db ...
Setting up unhide (20100201-1) ...

FreeBSD: Install unhide

Type the following command to install the same using the port, enter:
# cd /usr/ports/security/unhide/
# make install clean
OR, you can install the same using the binary package, enter:
# pkg_add -r unhide
unhide-tcp is a forensic tool that identifies TCP/UDP ports that are listening but are not listed in /bin/netstat through brute forcing of all TCP/UDP ports available.

How Do I Use This Tool?

You can use it as follows:
# unhide-posix proc
# unhide-posix sys
OR
# unhide-linux26 proc
# unhide-linux26 sys
# unhide-linux26 brute
Sample outputs:

Unhide 20100201
http://www.security-projects.com/?Unhide
[*]Searching for Hidden processes through kill(..,0) scanning
[*]Searching for Hidden processes through  comparison of results of system calls
[*]Searching for Hidden processes through getpriority() scanning
[*]Searching for Hidden processes through getpgid() scanning
[*]Searching for Hidden processes through getsid() scanning
[*]Searching for Hidden processes through sched_getaffinity() scanning
[*]Searching for Hidden processes through sched_getparam() scanning
[*]Searching for Hidden processes through sched_getscheduler() scanning
[*]Searching for Hidden processes through sched_rr_get_interval() scanning
[*]Searching for Hidden processes through sysinfo() scanning
HIDDEN Processes Found: 1

# unhide-tcp
Sample outputs:

Unhide 20100201
http://www.security-projects.com/?Unhide
Starting TCP checking
Starting UDP checking

However, I found something interesting:
# unhide-tcp
Sample outputs:

Unhide 20100201
http://www.security-projects.com/?Unhide
Starting TCP checking
Found Hidden port that not appears in netstat: 1048
Found Hidden port that not appears in netstat: 1049
Found Hidden port that not appears in netstat: 1050
Starting UDP checking

The netstat -tulpn or ss commands displayed nothing about the hidden TCP ports # 1048, 1049, and 1050:
# netstat -tulpn | grep 1048
# ss -lp
# ss -l | grep 1048

See also:

1. Unhide project.

Featured Articles:

• 20 Linux System Monitoring Tools Every SysAdmin Should Know
• 20 Linux Server Hardening Security Tips
• My 10 UNIX Command Line Mistakes
• The Novice Guide To Buying A Linux Laptop
• 10 Greatest Open Source Software Of 2009
• Top 5 Email Client For Linux, Mac OS X, and Windows Users
• Top 20 OpenSSH Server Best Security Practices
• Top 10 Open Source Web-Based Project Management Software
• Top 5 Linux Video Editor Software

Culled from nixCraft

Daybreak Afrika Technologies Facebook Fan Update

Cool Websites

Cool Websites and ToolsCheck out some of the latest MakeUseOf discoveries. Most of the listed websites are FREE or come with a decent free account option. If you want to have similar cool website round-ups delivered to your daily email

PowerInbox – Facebook users usually get an email from the social network each time they receive a wall post, comment, or any other type of notification. To view this notification you have to click on a link in the email that opens in a new tab. Here to save you from those extra click and new browser tabs is a web service called PowerInbox. Read more: PowerInbox: Use Social Networks From Email

		Smozzy – One of the major reasons people purchase smartphones is to browse the Internet. But increasing costs of data plans that phone carriers charge discourage smartphone owners from Internet browsing. Here to offer a workaround is an Android app called Smozzy. Instead of making you browse directly through your phone’s browser, the app lets you send your URL to it as an SMS. Read more: Smozzy: Browse The Web Without The Data Plan [Android 2.1+]
		Dropboxdiff – TextDiff programs let you compare texts and resolve any conflicts between them. They are most helpful while comparing and resolving multiple versions of the same file. In case your file versions are stored on your Dropbox account, you would normally first need to download them and then send them to your textDiff program. But an extension called Dropboxdiff does this for you in a single step. Read more: Dropboxdiff: Easily Compare File Versions On Dropbox

Culled from Make Use Of

Ensemble gets some juju!

The project with working title Ensemble, will make its first release under the name juju as part of Ubuntu 11.10’s Universe collection of packages. We will have a series of planned 11.10 Stable Release Updates for juju throughout the push to 12.04 LTS, which will mark the first enterprise release of the product.
Juju is the word for “magic” in the same African languages from which the term Ubuntu comes. Formulas will become charms (such magic is conducted with charms) and Principia will become the Charm Collection.

Why the name change?

While we liked the sophistication and refinement that went along with the name “Ensemble”, we were struggling to find a cohesive link between the tool itself, “formulas” for deployment, and “Principia” (the shared collection of formulas we want to grow a community around). All three were great names by themselves, but when combined didn’t connect well as a whole. First we considered going for a more music focused theme, with formulas becoming “collaborations” “chords” or “sheets” for example. However, given there’s already the Ubuntu Orchestra project, we felt like we might be taking the music theme too far, plus we were already having confusion around the two because of the name similarities. So we decided to go with something that had a bit of excitement and “punch” to it, that could also represent the same fun we’ve found folks having when using our project. We figured it should represent the complexities and mystery that often surround those skilled in the DevOps field, and be something that played on the same “u” sound and etymology as Ubuntu. Thus, “juju” was born!

When will the change happen?

Immediately! We’ve already created juju.ubuntu.com, with a redirect from ensemble.ubuntu.com in place. We also have the irc channel #juju reserved on freenode, and will soon rename the mailing list to juju@lists.ubuntu.com. Over the next week, we’ll update documentation, the associated Launchpad projects and teams, the code itself, and update the packages in Oneiric. Everything will be done and ready for testing in the Ubuntu 11.10 Beta 2 release. We’ll follow that up with updating the charms and will make new cloud.ubuntu.com related screencasts where feasible. For the record nothing else is changing, but the naming…the code and formulas will behave the same.
If you run into any problems or having any questions, please send them to me or post to ensemble@lists.ubuntu.com.
Thanks!
—
Robbie Williamson <robbie@ubuntu.com>
On behalf of the juju development team

Culled from Ubuntu Cloud Portal